Highfields Amateur Radio Club
Constructors Corner.
smoking soldering iron
copyright date

Icom Radio Programming Software.
By Brian, MW0GKX

Some time ago I contacted Icom to enquire about the purchase of software to program a radio (a site visitor had contacted me for help as he was trying to buy it and couldn't get it anywhere. "It's not stocked any more, it's too old." was what he was being told).

I was informed, by the contact at Icom, that the radio had been discontinued some years previously and that the programming software was no longer available for sale through the dealer network nor was it supported any more. Further advice on obtaining the software was; "Search the internet and if you find it, download it, use it and don't worry about it".

Since then I have received several enquiries regarding other older programming software for Icom radios (you just can't kill 'em!) and collected several pieces of such software, along with instructions wherever possible.

With this page I am short-cutting the "you email me, I dig it from my storage and email it back to you" method of obtaining it by posting the ones I have here, with any basic or special instructions that I am aware of.

Much of the software here was designed to run on a DOS based computer and may work with Windows (16 & 32 bit versions) in a DOS box or "booted to DOS" but 64 bit versions of Windows tend not run them at all. Also, on newer computers, you may have issues regarding USB to Serial interfaces, the software tends to only use COM 1 or 2 so any adaptor that you set up will need to be COM 1 or 2 to have a fighting chance! See page of general programming help for pointers if you have problems.

Copyright, as far as I know, still resides with Icom and others as noted in the software and I will remove the software from the site if I receive such a request from Icom or other copyright holder.

If you are not sure which program and/or lead you require for your radio take a look at the Icom Programming Info Index and find your radio there and take a note of the number, the links for the "EX-xxxx" software will bring you back to this page.

I'm afraid I cannot provide any further assistance or support for the software listed below beyond the Notes, Basic / Special Instructions as noted, therefore enquiries of a support nature may not receive an answer. If, however, there is something I've missed, c*ck*d up, etc., or if you have some older Icom software that you wish to share, feel free to contact me: webmaster@highfirld-arc.co.uk.

If it isn't listed here either I don't have it or it is still being offered for sale (and therefore still supported?) so please don't ask!

SoftwareNotes, Basic / Special Instructions
CS-41S#11
Revision 1
(2006)

4.25 MB
compressed
4.6 MB
uncompressed
Uncompressing the file will give folder "CS41S#11 rev1.0"
In that folder are CS41S#11 and CS41SADJ folders.
Programming software is in the first folder,
Adjustment software in the second.
Programming: Run the Setup.exe file
See the "id.txt" file for ID number.
Adjustment: Run the Setup.exe file
no ID number required.


SoftwareNotes, Basic / Special Instructions
CS-208H
Revision 1
(2003)

1.25 MB
compressed
1.4 MB
uncompressed

Run the Setup.exe file
See the "file_id.txt" file for ID number.


SoftwareNotes, Basic / Special Instructions
CS-2710
176 kB
compressed
255 kB
uncompressed

Run the CS2710.EXE file.


SoftwareNotes, Basic / Special Instructions
CS-2720
1.25 MB
compressed
1.39 MB
uncompressed

Run the SETUP.EXE file.
See the "id.txt" file for ID number.
Program includes "secret" Adjust Mode.
Adjustment Method by CS-2720 Cloning Software (PDF, 97 kB)


SoftwareNotes, Basic / Special Instructions
CS-2800
796 kB
compressed
938 kB
uncompressed

Run the SETUP.EXE file.


SoftwareNotes, Basic / Special Instructions
CS-F3
Revision 2
(1997)

477 kB compressed
928 kB uncompressed
Covers Radio and UT-105 option

Run the ICCF3.EXE file & select radio or option

(ADJ directory)
The CS-F3 manual below may assist you.
CS-F3
Revision 3
(1999)

776 kB compressed
1.54 MB uncompressed
Covers Radio, UT-105 & UT-111 options


CS-F3 Instruction Manual
(PDF, 714 kB)

(ADJUST.EXE)


SoftwareNotes, Basic / Special Instructions
CS-F3G
Revision 2.1
(2000)

574 kB compressed
1.13 MB uncompressed

Run the CSF3G.EXE file.
Does not add itself to the Start Menu in Windows!
CS-F3G Programming Manual (PDF, 3.45 MB)


SoftwareNotes, Basic / Special Instructions
CS-F50
Revision 1.1
(2003)

1.43 MB compressed
1.58 MB uncompressed
Needs product id to install: 268301-123456

Run the Setup.EXE file.
Enter the above product id when required.


SoftwareNotes, Basic / Special Instructions
CS-F300
Revision 1
(1997)

330 kB compressed
733 kB uncompressed
Covers Radio and UT-105 option

Run the ICCF300.EXE file & select radio or option
CS-F300
Revision 2.1
(1998)

538 kB compressed
1.11 MB uncompressed
Covers Radio, UT-105 & UT-111 options

Run the ICCF300.EXE file & select radio or option

(ADJUST.EXE)


SoftwareNotes, Basic / Special Instructions
CS-F300S
Revision 2.1
(1998)

419 kB
compressed
875 kB
uncompressed
Covers Radio and UT-105 option

Run the ICCF300S.EXE file & select radio or option

(ADJUST.EXE)


SoftwareNotes, Basic / Special Instructions
CS-F500
Revision 2.0
(2002)

1.36 MB
compressed
1.51 MB
uncompressed
Needs product id to install: 254301-123456

Run the Setup.exe file
Enter the above product id when required.
Programming Manual (PDF 5.9 MB)
CS-F500
Revision 2.2
(2005)

1.35 MB
compressed
1.51 MB
uncompressed
Needs product id to install: 254301-001099

Run the Setup.exe file
Enter the above product id when required.
Manual above (Revision 2.0) may assist you
CS-F500
Revision 2.3
(2005)

451 kB
compressed
752 kB
uncompressed

Run the CSF500.exe file
Product id not required with this version.
Does not add itself to the Start Menu in Windows!
Manual above (Revision 2.0) may assist you
CS-F500ADJ
Revision 1.0
(2001)

1.19 MB
compressed
1.38 MB
uncompressed

Run the Setup.exe file


SoftwareNotes, Basic / Special Instructions
CS-F600(MPT)
Revision 1
(2002)

1.26 MB
compressed
1.42 MB
uncompressed
Needs product id to install: 258402-123456

Run the Setup.exe file
Enter the above product id when required.


SoftwareNotes, Basic / Special Instructions
CS-F1600
Revision 2.2
(2005)

1.34 MB
compressed
1.49 MB
uncompressed

Run the Setup file to install
See the "ID number CS-F1600" file for ID number.


SoftwareNotes, Basic / Special Instructions
CS-M801
Revision 2
(2005-2006)

(covers A & E models under the "Model" menu)
1.29 MB
compressed
1.46 MB
uncompressed

Run the Setup.exe file
See the "password.txt" file for ID number.
Thanks to Thommy, DK1ESD, for his help.


SoftwareNotes, Basic / Special Instructions
CS-M802
Revision 1.1
(2002)

(not sure what models it covers)
357 kB
compressed
935 kB
uncompressed

Run the CSM802.exe file
Thanks to Thommy, DK1ESD, for his help.


SoftwareNotes, Basic / Special Instructions
CS-P7
Revision 1
(2005)

1.41 MB
compressed
1.56 MB
uncompressed

Run the Setup.exe file
See the "pass.txt" file for ID number.


SoftwareNotes, Basic / Special Instructions
CS-T7
164 kB
compressed
329 kB
uncompressed

Run the CST7.EXE file


SoftwareNotes, Basic / Special Instructions
CS-V8
Revision 1
(2001)

1.1 MB
compressed
1.25 MB
uncompressed
Needs product id to install: 248301-123456

Run the Setup.exe file
Enter the above product id when required.


SoftwareNotes, Basic / Special Instructions
CS-V85
Revision 1
(2006)

2.09 MB
compressed
2.24 MB
uncompressed
Needs product id to install, see "id.txt" file.

Run the Setup.exe file
Enter the product id when required.


SoftwareNotes, Basic / Special Instructions
EX-1211 comes in several different variants (-1, -2, -3 etc.),
the correct variant is required for your radio.
Currently I only have EX-1211-1 & -5.
If anyone would like to add other variants contact the webmaster.
EX-1211-1
66.7 kB compressed
183 kB uncompressed

H28.DOC Follow the instructions in sections 2 & 3 or the software will not start.
EX-1211-5
77 kB compressed
176 kB uncompressed

H10.DOC Follow the instructions in sections 2 & 3 or the software will not start.


SoftwareNotes, Basic / Special Instructions
EX-1489 comes in two different variants (-1, -2),
the correct variant is required for your radio.
Currently I only have EX-1489-1.
If anyone would like to add the other variant contact the webmaster.
EX-1489-1
Revision 3
573 kB compressed
1.4 MB uncompressed

COMMON.DOC, LMR.DOC & PMR.DOC

(TRIMMER.EXE)


SoftwareNotes, Basic / Special Instructions
EX-1682
97.6 kB compressed
251 kB uncompressed

Instructions are in the M58.DOC file within the compressed file.


SoftwareNotes, Basic / Special Instructions
EX-1690
154 kB compressed
313 kB uncompressed

Instructions are in EX1690.DOC here.


SoftwareNotes, Basic / Special Instructions
EX-1725
81.1 kB compressed
189 kB uncompressed

Run the EX1725.EXE file


SoftwareNotes, Basic / Special Instructions
EX-1726
99.8 kB compressed
235 kB uncompressed

Instructions are in the M710.DOC file within the compressed file.


SoftwareNotes, Basic / Special Instructions
EX-1764
167 kB compressed
429 kB uncompressed

Run the EX1764.EXE file


SoftwareNotes, Basic / Special Instructions
EX-1817 comes in two different variants (-1, -2),
the correct variant is required for your radio.
Currently I only have EX-1817-1.
If anyone would like to add the other variant contact the webmaster.
EX-1817-1
278 kB compressed
453 kB uncompressed

Run the EX1817.EXE file


SoftwareNotes, Basic / Special Instructions
EX-1911
190 kB compressed
440 kB uncompressed

Run the EX1911.EXE file

(EX1726 directory)


SoftwareNotes, Basic / Special Instructions
EX-1931
143 kB compressed
370 kB uncompressed

Run the EX1931.EXE file


SoftwareNotes, Basic / Special Instructions
EX-2041
142 kB compressed
330 kB uncompressed

Run the EX2041.EXE file


SoftwareNotes, Basic / Special Instructions
EX-2076
257 kB compressed
520 kB uncompressed

Run the EX2076.EXE file
(ADJ2074.EXE).


SoftwareNotes, Basic / Special Instructions
EX-2100
89.3 kB compressed
190 kB uncompressed

Run the EX2100.EXE file


SoftwareNotes, Basic / Special Instructions
EX-2118
299 kB compressed
431 kB uncompressed

Run the EX2118.EXE file

(ADJ directory)

Icom Programming Info Index, Constructors Corner Index,
Projects Home or Sitemap.