Highfields Amateur Radio Club
Constructors Corner.
smoking soldering iron
copyright date

Make a Kenwood E30-3382-05 Cloning Cable.
By Brian, MW0GKX.

This lead allows cloning of programmed data from one radio to another, see below for useage.

Parts

2 × 8P8C modular plugs
3 core cable or 3 separate wires to suit (about a meter should do it).

Method

Just connect as shown in the diagram below:
Pin 2 on plug 1 goes to pin 5 on plug 2,
Pin 5 on plug 1 goes to pin 2 on plug 2,
Pin 6 on plug 1 goes to pin 6 on plug 2.
Tha is pins 2 & 5 cross, pin 6 is straight through.

I find that pushing the unused pins (1, 3, 4, 7 & 8) into the plug with a small screwdriver first helps when aligning just a few wires like this.

cable scheme

Useage

Just select your radio from the list below for the cloning instructions:

TK-90.

TK-760G, TK-860G, TK-862G, TK863G.

TK-780, TK-780H, TK-880, TK-880H, TK-980, TK981.

TK-6110.

TK-7100.

TK-7102H, TK-8102H.

TK-7150, TK-8150.

TK-7160, TK-8160.

TK-7180, TK-7189, TK-8180, TK-8189.

TK-7302, 8302 (inc "H").

Constructors Corner Index Page.
Projects Home.
Or Sitemap.