Highfields Amateur Radio Club
Constructors Corner.

These radios use a lead that is the same as the Icom OPC-474

1. With both radios off, connect the cloning cable to the speaker jack of the MASTER and SLAVE transceivers (right).
   
   
2. Turn both radios on.
   
   
3. On the MASTER radio, while holding the [MONI] key press and release the [PTT] 3 times.
   "CLONE" appears and the transceiver enters the clone mode.
   
   
4. Press the [PTT] on the MASTER and the data is sent to the SLAVE.
   "SD ***" is displayed on the MASTER.
   When cloning is finished "PASS" is displayed on the MASTER.
   
   
5. Once cloning has completed sucessfully, turn power for both radios off and remove the connecting cable. When powered on again the radios will return to normal operation.