Highfields Amateur Radio Club
Constructors Corner.
smoking soldering iron
copyright date

Cloning instructions For:
DJ-446.
DJ-446.
By Brian, MW0GKX.

These radios use a lead that is the same as the Icom OPC-474
connection diagram

  1. With both radios off, connect the cloning cable to the speaker jack of the MASTER and SLAVE transceivers (right).

  2. Turn both radios on.

  3. While holding the [MONI] key press and release the [PTT] 3 times. Do this to each radio.
    "CLONE" appears and the transceivers enter the clone mode.

  4. Press the [PTT] on the MASTER and the data is sent to the SLAVE.
    "SD ***" is displayed on the MASTER.
    When cloning is finished "PASS" is displayed on the MASTER.

  5. Once cloning has completed sucessfully, turn power for both radios off and remove the connecting cable. When powered on again the radios will return to normal operation.

Constructors Corner Index Page.
Information Home.
Or Sitemap.